QUICK GUIDES

• Never use live ammo or modified cartridges.
• Wear hearing and eye protection at all times.
• Never throw at people or animals; avoid vehicles, windows, or fragile/flammable materials.
• Use in approved training/airsoft venues and comply with local laws and site rules.
• Blanks can produce hot gas and particles—keep clear of face, skin, and loose materials.
• Keep out of reach of children.
• Use only as described; inspect before each use and do not operate if damaged.
• You are responsible for safe operation, compliance, and risk assessment.

🔒 1. Safety First
• Always wear eye & ear protection.
• Use in approved training environments only. Avoid people, animals, fragile objects, or flammable materials.  
• Never use live ammunition—only blank firing cartridges (.209, 6 mm RIM, 9 mm blanks or 12g blank).  

🟢 2. Set to SAFE
• Twist apart the middle section until a visible gap appears—this disables the impact mechanism.  

💣 3. Load Blank Cartridge
• Unscrew the bottom cap.
• Insert one blank firing cartridge (choose the correct caliber for your adapter).  
• Screw the bottom cap firmly back on.

🔒 4. Secure SAFE Mode
• Ensure the middle section remains unlocked (gap present) to keep it in SAFE mode.

💥 5. Arm & Deploy
• When ready, twist the middle section fully closed—no gap = ARMED.
• Confirm safe direction and distance.
• Throw—on impact, the Tremor BFG generates a realistic blank-fire flash and sound.    

♻️ 6. After Use
• Allow a few seconds to cool off.
• Set back to SAFE by loosening the middle section.
• Unscrew bottom cap to remove spent cartridge.

• Never use live ammo or modified cartridges.
• Wear hearing and eye protection at all times.
• Never throw at people or animals; avoid vehicles, windows, or fragile/flammable materials.
• Use in approved training/airsoft venues and comply with local laws and site rules.
• Keep out of reach of children.
• Use only as described; inspect before each use and do not operate if damaged.
• You are responsible for safe operation, compliance, and risk assessment.

🔒 1. Safety First
• Always wear eye & ear protection.
• Keep the pin inserted while handling.
• Inspect threads & O-rings.

🟢 2. Fill with Gas
• Hold grenade upright.
• Invert green gas can and fill valve (5–10s × 2–3).
• Do not overfill.

💥 3. Load Blastcap
• Unscrew bottom cap.
• Insert bio blastcap (silver side facing out).
• Tighten cap securely.

🎯 4. Arm & Deploy
• Confirm safe distance & direction.
• Pull the pin to arm.
• Throw — loud bang on impact.

♻️ 5. After Use
• Wait a few seconds before retrieval.
• Remove spent cap & wipe residue.
• Re-gas & re-cap for next round.

• Never use live ammo or modified cartridges.
• Wear hearing and eye protection at all times.
• Never throw at people or animals; avoid vehicles, windows, or fragile/flammable materials.
• Use in approved training/airsoft venues and comply with local laws and site rules.
• Keep out of reach of children.
• Use only as described; inspect before each use and do not operate if damaged.
• You are responsible for safe operation, compliance, and risk assessment.

🔒 1. Safety First
• Always wear eye protection.
• Keep the safety pin inserted during all preparation steps.
• Check the shell, rubber o‑ring, and general condition.   

🟢 2. Load Gas
• Place EPSILON upright with the pin in.
• Invert your green gas can, press it against the valve, and fill for 5‑10 seconds, repeating 2–3 times until charged.    

💠 3. Load BBs
• Locate the loading hole on the shell (around the rubber o‑ring).
• Press the rubber o‑ring slightly downward with your thumb—this makes loading quicker and easier.
• Using a speedloader, fill both apertures until full—up to ~106 BBs in total.   

🎯 4. Ready to Deploy
• The grenade is now armed—upon removing the pin, the nozzle pops up to indicate it’s live.
• Ensure a safe direction and adequate distance.
• Pull the pin and throw—on impact, the grenade spins and disperses BBs in a wide 360° pattern.    

♻️ 5. After Impact
• Once deployed, wait a moment before retrieving.
• Inspect for residual BBs or debris and remove them.
• Store with the pin inserted, empty of gas and BBs, in a cool, safe place.

• Never use live ammo or modified cartridges.
• Wear hearing and eye protection at all times.
• Never throw at people or animals; avoid vehicles, windows, or fragile/flammable materials.
• Use in approved training/airsoft venues and comply with local laws and site rules.
• Blanks can produce hot gas and particles—keep clear of face, skin, and loose materials.
• Keep out of reach of children.
• Use only as described; inspect before each use and do not operate if damaged.
• You are responsible for safe operation, compliance, and risk assessment.

🔒 1. Safety First
• Always wear eye protection.
• Keep the safety pin inserted while preparing.
• Inspect the shell and O-ring; do not use if damaged.

🟢 2. Load BBs – Bag & Twist Method
• Place BBs in a small bag.
• Drop the NOVA into the bag and twist the grenade around—this efficiently loads BBs into the multiple holes in the shell.
• Repeat until full (maximum of 72 BBs).

🆙 3. Insert Pin
• After loading BBs, reinsert the safety pin to keep the grenade safe during gas refill.

⛽ 4. Load Gas
• With the pin still inserted, hold the NOVA upright, and fill the valve with green gas (5–10 seconds, repeat 2–3 times) until charged.

🎯 5. Arm & Deploy
• Remove the pin to arm—the nozzle will rise, indicating the device is ready.
• Throw the grenade in a safe direction; on impact, it releases BBs in a 360° spinning burst.

♻️ 6. After Use
• Wait a few seconds, then retrieve.
• Clear any remaining BBs, inspect the O-ring/shell.
• Store unloaded and depressurized, pin inserted, in a cool, dry place.